Pro Tips and Tricks for Installing a New Shower Unit

Pro Tips and Tricks for Installing a New Shower Unit

Blog Article

Call Today

Are you currently hunting for suggestions about How to Install a Direct-to-Stud Shower Enclosure?

A successful shower setup needs careful preparation and also a great deal of work. Most of the times, you will certainly require to do 3 types of jobs: mounting wall surfaces, setting up the plumbing, and also ending up wall surfaces.

Various Sorts Of Shower Units

Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower unit can be attached to the bathroom tap based on your requirement, and also the water temperature can be adjusted using the taps. Push-on mixers are cheap as well as exceptionally basic to set up. Nevertheless, although the hose pipe connection is straightforward, it is quickly displaced. In addition, it is inconvenient to change the temperature.

Bath/Shower Mixer: The pipe and also spray of this type of shower are integrated with a bathroom mixer faucet, and the temperature can be adjusted with the bathroom taps. It is a very inexpensive option as well as no extra plumbing is included. However, the bath/shower mixers additionally experience troublesome temperature level control choices.

Handbook Mixer: The hose and also spray of a hand-operated mixer shower unit are a part of the wall device as well as the hot and cold water materials are connected to a single shutoff The temperature and also pressure of the water are regulated through either one or a variety of handles (in more pricey showers). Although temperature control is much easier in manual mixer kinds, they are much more costly than the previously mentioned mixers. They additionally require added plumbing of cold and hot supply of water pipelines.

Thermostatic Mixer: The hose pipe and spray of this shower kind belong of the wall unit as well as the cold and hot water supplies are attached to a solitary valve below too. It is complete with a built-in stabiliser to self-adjust the water temperature level and to prevent it from coming to be also hot. Among the biggest advantages of a thermostatic mixer shower type includes practical temperature control. Nonetheless, it is the most pricey of the various mixer choices.

Power Shower: A power shower is a single unit having a powerful electric pump that can modifying both the water pressure and also temperature. This type of shower can be fitted if there is water system from a cold water cistern and a hot water cylinder. A power shower makes the adjustment of both stress as well as temperature easy. On the other hand, it is unsuitable for water heated directly by the shower or where the water is supplied by a combination central heating boiler under mains pressure.

Electric Shower: An electrical shower is plumbed into a mains cold water supply and it heats up the water electrically. It is important to keep in mind that for this shower kind to be set up, the keys pressure needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The unit allows the temperature level as well as pressure to be changed by means of a knob. Designs with temperature stabilisers are much better as they remain untouched by various other taps elsewhere in operation within the house. A significant downside of electric showers is that the control handle just allows for the option of high temperatures at less pressure, or reduced temperature levels at a better stress. This is problematic in the winter when the spray is often weak and the keys water is colder. However, this trouble is taken on in some designs which are readily available with a winter/summer setup.

The Majority Of Usual Blunders

Violating or disregarding local code constraints.

Making use of pipes that are also tiny.

Attaching copper to galvanized without using a brass or dielectric fitting in between the two.

Not using tape or pipe substance at threaded joints.

Uneven your components when installing them.

Not installing an air gap filling up for components.

Reducing supply stub outs also short to mount the shutoff valves onto after the completed wall remains in location.

Not appropriately lining up tubes into fittings or stop shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will cause a leak.).

When turning the water back on in your home, always run the outdoors hose valve or purge your bathrooms to bleed dirt and also air from the lines. This debris can cause problems in your sink faucets and various other plumbing trim.

Prep work.

To start with, you need to pick the kind of shower that you want to install. It is very important to ascertain whether the picked shower is capable of dealing with certain systems as well as can control a secure degree of water through the central heating boiler. A lot of shower units nowadays are created to be flexible to various water stress (such as saved hot water as well as cold keys).
It is also crucial to consider the water stress and also the planning of the piping as well as drainage for the shower.

Technique.

Depending on the type of shower you wish to mount, the shower head should either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it should have a check shutoff.
Before starting, it is recommended to note the settings of the shower head as well as control, and also to plan the pipe-work involved. Furthermore, the drain system to get rid of the waste water will certainly need to be intended. Both settings of the cord course as well as the shower switch will likewise require to be taken into consideration if an instantaneous or electrical shower system is being mounted.
Utilize the direction overview offered with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is essential to remove the supply of water. In order to shield the pipes, they ought to be offered a water-proof covering and additionally fitted with isolating shutoffs. The pipelines can after that be hidden into the wall surface as well as smudged over to neaten the total look.
Fit the base tray, shower head, and installations.
Attach the major shower control to the pipes that will certainly be providing the water (This might need a female screw string adapter).
Reconnect the water and test the pipelines for any leaks, as some may need tightening up.
If you are setting up an electric shower, keep in mind to switch off the electricity supply prior to making any electric links. Once these connections have actually been made (there ought to be assistance within the instruction manual), the power supply can be changed back on.

Adjusting Water Pressure to Fit Your Shower.

The cold water storage tank can be lifted to a higher height (sometimes as low as 150mm (6inches)) by installation a solid wood support beneath it - potentially made up of struts as well as blockboards. If you pick this alternative, the primary as well as circulation pipes will certainly also need to be increased to meet the new elevation of the reservoir.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it should be linked right into the power supply in order to run.

Piping as well as Drainage.

It is best to make use of 15mm diameter supply pipes, and also make the runs to the shower as brief as well as straight as possible so regarding preserve optimal pressure and reduce warm loss. Additionally, by minimising making use of elbows for pipeline corners, you can lower the resistance in the circulation of the supply of water. You can accomplish this by flexing the pipes instead.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As a reader about How to Install a One-Piece Shower Unit, I figured sharing that excerpt was beneficial. Sharing is caring. Helping others is fun. Bless you for your time. Come back soon.

Prices & Booking

Report this page